Rainbow Loom Designs

Rainbow Loom Designs:

Lets start with the Beginners like me then the medium and do the hardest design last.

Beginner:
Single Chain Bracelet
Take 13 Red Bands and 13 yellow bands and a e’clip (the s shaped thing)
Take the loom and make the red arrow pointing away from you.
Take a red band and put it on the first pick going right.
Take a yellow and put it diagonally to the middle row, 2nd peg.
Then continue your pattern until the last peg.
Take the loom and point the red arrow toward you, take first pin with two bands on it and take the bottom band our yellow band and take the back of your hook to pull the red band back and take the yellow band with your hook and put it onto the left pin.
Take the last band and pull it out to the pin in the row where there is no bands and take the e’clip and attach it to the bands then start taking the bands out.
If it is too big on you or the person you are giving it to it is no problem just take a band or 2 or even more off.
There are 3 different bracelets that I made in 3 different sizes for 3 different people.

Intermediate Level:
Diamond Ridge Bracelet
What you are going to need is:
24 white
24 pink
12 black
1 e’clip
Turn the loom so that the red arrow is pointing away from you.
Start by putting 12 black bands across the middle of the loom.
Then start putting 8 white bands in a diamond shape From center to right, from center to left, from left to center, and from right to center.
Then put 8 pink bands in a diamond shape From center to right, from center to left, from left to center, and from right to center.
Continue with this pattern until the end.
Now it is time for the fun part, looping the bands.
Turn the board so that the red arrow is pointing toward you.
First pull back the cap band back and get the first pink band you put on and put it back upon itself.
Then take the black band and put it back upon itself finish this process until the end.
Then pull forward the black band and make it go up to the thickest part of the stick then pull it off.

Random Level:
Butterfly Blossom Ring
You will need:
10 pink
2 purple
1 e’clip
Turn the loom so that the red arrow is pointing towards you.
Start by making a chain but with only 2 pink bands
Then take a pink band and put it toward the left
Then put 1 pink chain up and then 1 to the center.
Then do same to the right.
Then make a 2 ring chain up the loom
Then make a figure 8 and place it from one end of the hexagon to the other end.
Then do the same on the other side of the hexagon. in the middle of the hexagon there should be an X.
Then turn your loom around so the arrow is pointing toward you and starting with the 2nd pink band in the chain loop it.
Then loop the next one to the left.
Then go back to the center and take the other pink one there and loop it.
Then go up till the end of the loom with this process.
When you are done looping including the last 2 pink in the chain stretch the last one to the right so it is easier to put the e’clip on.
Then put the e’clip on. When you are sure it is secure pull the whole ring off.